Tech Spec Gripster Pad- Snake Skin
|
The ulitmate in tank grip.
Snake Skin
(Precut Kit includes
right & left Grip Pads)
|
| |
Tech Spec Gripster Pad- High Fusion
|
High Fusion
(Precut Kit includes
right & left Grip Pads)
|
| |
Tech Spec General Sheets Snake Skin
|
Two 7.5x13.0 inch Sheets for you to custom cut your own. Included is one center tank protector.
|
| |
Tech Spec General Sheet High Fusion
|
Two 7.5X13.0 inch sheets to cut your own design. Includes center tank protector.
|
| |
Tech Spec Tank Pad Add on
|
You must purchase one of the other kits to be eligible to purchase the tank pad. Picture to be Added
|
| |
Slingshot Racing Adjustable Levers
|
- CNC Machined from 6061-T6 Billet Aluminum
- Finished with Anodize Coating (Choose from Silver, Black, or Gold Levers)
- Folding Pivot on Levers to Minimize Crash Damage
- Precision Machined Bore for Ultra Smooth Movement
- 6-Way Position Adjustment for Each Lever to Customize to Your Riding Style
- High-Quality Bearings for Seamless and Precise Adjustments
- Direct Stock Bolt-In (no modification needed) - reuses your stock bolts
|
| |
Emissions Block Off Plate
|
- Brand New Kawasaki Ninja 250R Emission Block Off
- Made from 100% 6061 T-6 Aluminum and finished with Gold Anodize
- Removes the smog system which eliminates error when making air/fuel ratio measurements
- Essential when DYNO tuning your motorcycle
- Improves exhaust scavenging
- Comes with (1) Emission Block-Off (only one is needed for this motorcycle)
- Easy installation (reuses your stock screws)
|
| |
Exhaust Hanger
|
- 100% CNC Machined Billet Aluminum (we machine these from a solid block of aluminum)
- SSR exhaust hangers are rigid and sturdy (we do NOT bend our bars)
- Comes with our signature machined logo for added detail
- Weighs only 2.4 oz (save up to 3 pounds when removing both passenger foot pegs)
- Comes with (1) Exhaust Hanger (3) Washers (3) O-Rings (2) Bolts (1) Lock Nut
|
| |
Lowering Riser Kit
|
- 100% CNC Machined Billet Aluminum (we machine these from a solid block of aluminum)
- Anodized in Black
- 25.5mm in riser thickness, lowers the fork by 1 inch
- Improves handling and comfort
- Comes with (1) Left-Side Riser (1) Right-Side Riser (4) Bolts
|
| |
Lowering Kit Riser (5mm & 10mm)
|
- 100% CNC Machined Billet Aluminum (we machine these from a solid block of aluminum)
- Anodized in Black
- Allows for 5mm, 10mm, or 15mm in riser adjustment
- Lowers your fork height by 5mm, 10mm, or 15mm
- Improves handling and comfort
- Comes with (1) Left & Right 5mm Riser (1) Left & Right 10mm Riser (4) Bolts
|
| |
Ninja 250R CNC Billet Suspension Bar Set
|
- Made from 100% 6061 T-6 Aluminum and finished with Anodize Coating
- Improves rear traction (depending on set up)
- Lowers motorcycle up to 5 inches
- Allows for quick adjustments (up to five different positions - including stock position)
- Comes with (2) Suspension Bars (2) Copper Bushing already pressed in
- Easy installation and can be done under 20 minutes
|
| |
Carbon Fiber Fender Eliminator
|
- Made from high-quality 3K Carbon Fiber. Fiber glass backing with epoxy resin binding.
- Manufactured using vacuum bagging and finished with a high-gloss clear coat.
- License Plate Holder can be detached from Rear Tail-Light Housing for Track Day Use
- Comes with (1) Rear Tail-Light Housing (1) License Plate Holder
|
| |
08+ Ninja 250 Billet Kickstand
|
- 100% CNC-Machined
- Made from Billet Aluminum (6061-T6)
- 2 oz lighter compared to the stock kickstand
- Finished with anodize coating Black or Silver
- Same height as stock and slightly wider footprint
- Reuses your stock bracket, springs, and bolts (no extra parts needed)
|
| |
